Eco Settings - Philips 8503 Series User Manual

Ambilight + Hue
Configure
 Settings
> Ambilight > Ambilight+hue
Setup your Philips Hue bulbs to follow the colours of
Ambilight.
Switch Off
Switch off Ambilight+hue
 Settings > Ambilight > Ambilight+hue > Switch
off.
Immersion
 Settings
> Ambilight > Ambilight+hue > Immersion.
Press the arrows  (up) or  (down) to adjust
how accurate the Hue bulbs follow the Ambilight.
Lounge Light+hue
If you installed Ambilight+hue, you can let the hue
bulbs follow Lounge Light from Ambilight. The Philips
hue lamps will expand the Lounge Light effect across
the room.
Switch on/off the hue bulbs
 Settings > Ambilight > Ambilight+hue > Lounge
light+hue.
View Configuration or Reset
View current setup of the Ambilight+hue, network,
Bridge and bulbs
 Settings > Ambilight > Ambilight+hue > View
configuration.
Reset current setup of the Ambilight+hue
 Settings > Ambilight > Ambilight+hue > Reset
configuration.
> Configure.
Advanced Ambilight Settings
Neutralise the influence of a coloured wall on the
Ambilight colours
 Settings > Ambilight > Advanced > Wall colour.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they
are intended.
 ISF Tuning
 Settings > Ambilight > Advanced >
tuning.
The ISF Calibration expert tunes and locks your
preferred colour for Ambilight. When the ISF
Calibration is done, select  Settings > Ambilight >
Ambilight style > Follow colour >  Warm white to
use ISF tuning for Ambilight.
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
 Settings > Ambilight > Advanced > TV switch
off > Fade out to off / Immediately switch off.
14.4

Eco Settings

Set energy saving level
 Settings > Eco settings > Energy saving.
Select Maximum, Medium, or Minimum to have
different degress for energy saving, or select Off to
switch off energy saving mode.
Set screen off to save energy consumption
 Settings > Eco settings > Screen off.
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
 Settings > Eco settings > Light sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
52
 ISF