Philips 50PUS6504 User Manual

Hide thumbs Also See for 50PUS6504:
Table of Contents

Advertisement

Quick Links

Register your product and get support at
6504 series
www.philips.com/TVsupport
User Manual
50PUS6504
58PUS6504

Advertisement

Table of Contents
loading

Summary of Contents for Philips 50PUS6504

  • Page 1 Register your product and get support at 6504 series www.philips.com/TVsupport User Manual 50PUS6504 58PUS6504...
  • Page 2: Table Of Contents

    Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 TV on Demand / Video on Demand 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Netflix 2 Software...
  • Page 3: Get Support

    Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
  • Page 4 cause severe injury, irrepairable damage to your TV or void your warranty.
  • Page 5: Software

    back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press  twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
  • Page 6: Quick Guide

    Quick Guide Remote Control Batteries and Cleaning Replace batteries  Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ...
  • Page 7: Ir Sensor

    7 -  OPTIONS To open or close the Options menu. IR sensor The TV can receive commands from a remote control Bottom that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
  • Page 8: Setting Up

    • 43PUS6504 VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 18 mm) Tips on Placement • 50PUS6504 VESA MIS-F 200x200, M6 (Minimum 12 mm, • Position the TV where light does not shine directly Maximum 18 mm) on the screen.
  • Page 9 Connect Power Cable • Insert the power cable into the POWER connector on the back of the TV. • Make sure the power cable is securely inserted in the connector. • Make sure that the power plug, in the wall socket, is accessible at all times.
  • Page 10: Connections

    Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
  • Page 11: Audio Device

    Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection.
  • Page 12: Mobile Device

    mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device.
  • Page 13: Other Device

    When you switch on the TV, it may take a few minutes favourite app store today. before the CAM is activated. If a CAM is inserted and The Philips TV Remote App is available for iOS and subscription fees are paid (subscription methods can Android and is free of charge.
  • Page 14 To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on 1. Press  SOURCES . your TV before you install the USB Hard Drive. 2.
  • Page 15 A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
  • Page 16: Switch Source

    Switch Source Source List • To open the sources menu, press  SOURCES . • To switch to a connected device, select the device with the arrows  (Right) or  (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
  • Page 17: Channels

    for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
  • Page 18 frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
  • Page 19 • Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
  • Page 20  (Home) > Settings > Install Manual Installation Channels > Satellite installlation > Search for satellite > Remove satellite  (Home) > Settings > Install Channels > Satellite installlation > Manual You can remove one or more satellites from your installtion current satellite installation.
  • Page 21 With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
  • Page 22: Channel List

    language (the language set on TV), the TV can show Channel info subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages Select Channel info to view the technical information must also be part of the broadcast. of the channel.
  • Page 23 Channel List Options Select Channel Range  > OK >  OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
  • Page 24: Favourite Channels

    With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite Favourite Channels channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default About Favourite Channels list will be appended after your favourite channels for your preview.
  • Page 25 Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press  OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV.
  • Page 26: Tv Guide

    Change Day TV Guide If the TV guide information comes from the broadcaster, you can press  + to view the schedule of one of the next days. Press  - to go back to the previous day. What You Need Alternatively, you can press ...
  • Page 27 Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press  TV GUIDE and select a future or ongoing programme. 2 - Press the colour key  Record . To cancel a recording… 1 - Press ...
  • Page 28: Recording And Pause Tv

    To record a programme… Recording and 1 - Press  TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press  (Right) Pause TV or  (Left) to scroll through the programmes of a channel.
  • Page 29: Pause Tv

    8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds.
  • Page 30: Videos, Photos And Music

    Photo Options Videos, Photos and With a photo on screen, press  OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
  • Page 31: Videos

    360 Photo Options Video Options With a 360 photo on screen, press  OPTIONS to… During the video playback, press  OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random.
  • Page 32: Open Tv Setting Menus

    ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •...
  • Page 33 not supported in Monitor mode. The TV is able to play  (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Contrast will be applied. Press the arrows  (up) or  (down) to adjust the contrast value of the picture.
  • Page 34 Custom colour temperature Dynamic Contrast Select Custom in Colour temperature menu  (Home) > Settings > All to customise a colour temperature yourself. Press settings > Picture > Expert mode the arrows  (up) or  (down) to adjust the value. settings >...
  • Page 35 different degress of smoothing the artefects in digital extreme picture formats can still show black bars. video content. Picture content aspect ratio may change. MPEG artefacts are mostly visible as small blocks or • Fit to screen – automatically zooms in the picture jagged edges in on-screen images.
  • Page 36 • Original - Most neutral sound setting Select On a TV stand or On the wall to have best • Movie - Ideal for watching movies sound reproduction according to the setting. • Music - Ideal for listening to music •...
  • Page 37 the TV speakers when the device is playing the • If you cannot set a delay on the Home Theatre sound. System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture.
  • Page 38 control > On General Settings Connection Related Settings Note: - EasyLink might not work with devices from other Format USB Hard Drive brands.  (Home) > Settings > All settings > General - The HDMI CEC functionality has different names on settings >...
  • Page 39 Adjust Picture and audio Eco Settings  (Home) > Settings > All settings > General Set energy saving level settings > Shop setup > Picture and audio  (Home) > Settings > All settings > General Select Optimized to shop or Custom settings for settings >...
  • Page 40 Auto delay setting Digital TV channels can broadcast audio with several Set the Auto delay time from 15 seconds to 5 minutes. spoken languages for a programme. You can set a preferred primary and secondary audio language. If Auto loop selection audio in one of these languages is available, the TV will switch to this audio.
  • Page 41 PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people  (Home) > Settings > All settings > Universal access >...
  • Page 42 Set code  (Home) > Settings > All settings > Child lock > Set code Set the PIN code to lock or unlock the TV.
  • Page 43: Wireless And Networks

    If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet.
  • Page 44: Wireless And Network Settings

     (Home) > Settings > All settings > Wireless  (Home) > Settings > All settings > Wireless and networks > Clear Internet Memory and networks > Static IP configuration With Clear Internet Memory you clear your Philips 1 - Select Static IP configuration and configure the...
  • Page 45 Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
  • Page 46: Smart Tv

    Search Smart TV With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select  and 13.1 press OK to start searching. You can enter names, Setup Smart TV titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a The first time you open Smart TV, you need to...
  • Page 47: Tv On Demand / Video On Demand

    TV on Demand / Video on Demand TV on Demand  (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand  (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
  • Page 48: Netflix

    Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press  to open the Netflix App. You can open Netflix immediately from a TV in standby.
  • Page 49: Amazon Prime Video

    Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
  • Page 50: Youtube

    YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
  • Page 51: Environmental

    1 year. You quality materials and components, which can be can also find the power consumption values for this recycled and reused. product on the Philips website for your country www.philips.com/TVsupport 18.2 Product Fiche...
  • Page 52 Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health.
  • Page 53: Specifications

    19.3 HD (50Hz or 60Hz) YCbCr 4:2:0 signals. Display Resolution Diagonal screen size Component, Composite • 50PUS6504 : 126 cm / 50 inch • 58PUS6504 : 146 cm / 58 inch Composite Display resolution • PAL, NTSC, SECAM • 3840 x 2160 Component •...
  • Page 54: Sound

    • Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 19.5 photo Supported Input Resolution - Wi-Fi Certified Computer This TV supports Miracast certified devices. Performance may vary, depending on the capabilities • 640 x 480 - 60Hz of the mobile device and the software used. •...
  • Page 55: Troubleshooting

    Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
  • Page 56: Satellite

    Press  (Home) > Settings > Help > Check the TV. settings at the start of the installation. You can set the If the video clip stays black, call Philips. Wait until the TV to search for One, Two or 3/4 satellites.
  • Page 57: Sound

    Call the telephone number for your country.  (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change Picture does not fit the screen / Wrong or unstable back to current source.
  • Page 58: Hdmi - Uhd

    20.8 20.10 HDMI - UHD Wi-Fi and Internet HDMI Wi-Fi network not found or distorted • Note that HDCP (High-bandwidth Digital Content • Check if the firewalls in your network allow access Protection) support can delay the time taken for a TV to the TV's wireless connection.
  • Page 59: Safety And Care

    The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
  • Page 60: Screen Care

    Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
  • Page 61: Terms Of Use

    TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V.
  • Page 62: Copyrights

    23.4 DTS-HD (italics) Copyrights DTS 23.1 For DTS patents, see http://patents.dts.com. HDMI Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol The terms HDMI and HDMI High-Definition together, DTS-HD, and the DTS-HD logo are Multimedia Interface, and the HDMI Logo are registered trademarks and/or trademarks of DTS, Inc.
  • Page 63: Open Source

    P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 24.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
  • Page 64 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
  • Page 65 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
  • Page 66 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
  • Page 67: Disclaimer Regarding Services And/Or Software Offered By Third Parties

    Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
  • Page 68: Index

    Digital Out Offset 37 Parental Rating 41 Dynamic Contrast 34 Pause TV 29 Philips Support 3 Philips TV Remote App 13 End of Use 51 Photos, Videos and Music 30 Energy Saving 39 Picture Clean, Noise Reduction 34 Equalizer 36...
  • Page 69 Picture, Colour 33 Update Software - OAD 5 Picture, Contrast 33 Update Software - USB 5 Picture, Sharpness 33 USB Flash Drive 14 Power Cable 9 USB Hard Drive 38 Problems 55 USB Hard Drive - Format 14 Product Fiche 51 USB Hard Drive - Install 14 USB Hard Drive Connection 14 USB Keyboard Settings 38...

This manual is also suitable for:

6500 series58pus650450pus6504/6058pus6504/60

Table of Contents