Lenovo thinkpad 13 User Manual page 82

• If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive
encryption locks the computer from starting once detects the change of startup sequence.
To change the startup sequence temporarily so that the computer starts from a desired drive, do the following:
1. Turn off the computer.
2. Turn on the computer. When the logo screen is displayed, press F12.
3. Select the device that you want the computer to start from.
Note: The Boot menu will be displayed if the computer cannot start from any devices, or the operating
system cannot be found.
The following table lists the Startup menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Table 4. Startup menu items
Menu item
Boot
Network Boot
UEFI/Legacy Boot
66
ThinkPad 13 User Guide
Value
• USB CD
• USB FDD
• NVMe0
• ATA HDD0
• USB HDD
• PCI LAN
• Both
– UEFI/Legacy Boot Priority
– UEFI First
– Legacy First
• UEFI Only
• Legacy Only
CSM Support (for UEFI Only)
• Yes
• No
Comments
Select the boot device when you
press the power button to turn on the
computer.
Select the boot device when the system
wakes from LAN. If Wake On LAN is
enabled, the network administrator can
turn on all of the computers in a LAN
remotely by use of network management
software.
Select system boot capability.
• Both: Select priority of boot options
between UEFI and Legacy.
• UEFI Only: The system will boot from
the UEFI enabled operating system.
• Legacy Only: The system will boot
from any operating system other than
the UEFI enabled one.
Note: If you select UEFI Only, the
system cannot boot from the bootable
devices that do not have the UEFI
enabled operating system.
Compatibility Support Module (CSM) is
required for booting the legacy operating
system. If you select UEFI Only, CSM
Support is selectable. For Both or
Legacy Only mode, CSM Support is not
selectable.