Replacing The M.2 Solid-State Drive - Lenovo thinkpad 13 User Manual

5. Slide the keyboard frame backward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool to
hide the latches of the keyboard frame under the keyboard bezel.
6. Insert the flat end of the keyboard multi-tool into the sides of the keyboard as shown to push the
keyboard frame backward. Ensure that there is no gap between the keyboard frame and keyboard bezel.
7. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing the M.2 solid-state drive

Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
Attention: The M.2 solid-state drive is sensitive. Incorrect handling can cause damage and permanent loss
of data. Observe the following guidelines:
• Replace the M.2 solid-state drive only if you upgrade it or have it repaired. The connectors and slot of the
M.2 solid-state drive are not designed for frequent changes or replacement.
.
Chapter 10 Replacing devices
109