Electrical Connection - U.s.a. Only - Whirlpool W10575959B Installation Instructions Manual

Power Supply Cord
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range. Pull cover down and
toward you to remove cover.
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
4. Add strain relief.

Electrical Connection - U.S.A. Only

Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Style 1: Power supply cord strain relief
Assemble a UL Listed strain relief in the opening.
■
A. UL Listed strain relief
Feed the power supply cord through the strain relief in the
■
cord/conduit plate on bottom of range. Allow enough slack
to easily attach the wiring to the terminal block.
Tighten strain relief screw against the power supply cord.
■
A
7