Troubleshooting Guide - Vitek Winx Club WX 4001 MS Manual Instruction

Cd/mp3 radio cassette recorder

Hide thumbs

Table Of Contents

Table of Contents

Available languages

ENGLISH

6. Press the STOP / EJECT button to cancel the

record mode.

Note: return to the cassette playback mode,

rewind the cassette to the beginning to lis-

ten to the records made.

CONNECTING THE EARPHONES

Jack (3,5mm) (3) is intended to connect the ear-

phones with 16-32 Ohm resistance. Playback

from the built-in speakers will switch off auto-

matically when the earphones are connected.

AUX IN jack

To connect an external device use the AUX IN (2)

jack. Connect an external device using the au-

dio cable 3,5 mm Jack - 3,5 mm Jack (not sup-

plied).

MAINTENANCE AND SAFETY MEASURES

Safety measures and general maintenance

- Place the unit on the hard stable surface in a

way that the unit is not declined.

- Do not subject the unit, the batteries, CD-

discs to moisture, rain, sand or extremely high

temperature from heaters or direct sunlight.

- Do not cover the unit during its operation.

Allow 6 inches (15 cm) of free space between

the ventilation openings and the neighbor

surfaces for the unit not to heat up.

- Mechanical parts of the unit contain bearings

with self lubricating; they do not need lubrica-

tion.

- Use soft dry cloth to clean the unit. Do not use

cleaners, which contain alcohol, ammonia,

petroleum or abrasives, because they can

damage the body of the unit.

CD-player and storage of CD-discs

- Do not touch the lens of the CD-player!

- At extreme temperatures difference of the

environmental air condensation can appear

on the lens of the CD-player. It will become

impossible to playback a disc. Do not try to

clean the lens. Leave the unit in a warm room

until the moisture evaporates.

- Always close the CD-slot, to avoid getting of

dust into the slot. To clean the disc slot, wipe

it with a soft dry cloth.

- To clean a CD-disc, wipe it along the direct

line from the center to the edges with a soft

lint-free cloth. Do not use cleaners, they can

4001Instruk_ital.indd 8

damage the disc.

- Never write on a CD-disc and do not attach

any stickers to it.

CLEANING OF THE RECORDING MECHA-

NISM

Magnetic heads of the cassette recorder, its

capstan idlers and capstan axis require periodi-

cal cleaning. It is necessary to remove parts of

metal oxides, which cause depletion of the tape

and accumulate on the stated above parts of

the cassette recorder; it makes the operation of

the magnetic head worse. Switch off the unit,

pressing the STOP/EJECT button, to open the

cassette slot, and press the PLAY button. Clean

the magnetic heads of the cassette recorder, its

capstan idlers and capstan axis with a soft cloth

or a cotton pad, dampened in isopropyl alcohol,

or use a special substance for cleaning mag-

netic heads.

NOTE: never use metal objects during

cleaning of magnetic heads. Provide that

cleaning substances do not get into the cas-

sette slot.

CLEANING OF THE UNIT

• To avoid fire or electric shock, unplug the

unit before cleaning.

• You can clean the surface of the unit using

the cloth for dust removal. Be careful when

cleaning plastic parts.

• When the columns bodies become dirty, use

a soft dry cloth for dust removal. Do not use

wax or abrasive polishes to clean columns

bodies.

• When the front panel becomes dirty, use a

soft cloth, slightly dampened in a weak soap

solution. Never use abrasive substances or

polishes, they can damage surface of the

unit.

Be careful! Provide that water or other liq-

uids do not get inside the unit during clean-

ing.