Class 1 Laser Product; Safety Measures - Vitek Winx Club WX 4001 MS Manual Instruction

ATTENTION!
The unit is not a toy! Do not allow children to
play with the unit.
Read the instruction
before use. Use the unit only for its intended
purposes, as described in this manual.
Improper handling of the unit can lead to its
damage, do harm to the user or its property.
This unit is not intended to be used by
children. Children can use the unit ONLY
under supervision of the person responsible
for their safety and only after this person
gave them complete and clear instructions
on safe use of the unit and danger which can
be caused by its improper use.
CD/МР3 RADIO CASSETTE RECORDER
INSTRUCTION MANUAL
Please, read these instructions carefully before
connecting, operating or adjusting the unit. Fol-
low all warnings and operating recommendations
in this manual.
Keep this manual for future reference.
RISK OF ELECTRIC SHOCK
Warning: To prevent fire or shock hazard do not
expose the appliance to rain or moisture.
To prevent shock hazard do not remove the cover
yourself. Apply to a service centre for repair and
maintenance.
DANGEROUS VOLTAGE
This lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
manual accompanying the appliance.

CLASS 1 LASER PRODUCT

This unit is classified as CLASS 1 LASER PROD-
UCT. The corresponding mark is on the rear
4001Instruk_ital.indd 3 4001Instruk_ital.indd 3
manual carefully
ATTENTION!
DO NOT OPEN
panel of the unit and it means that the unit ap-
plies a laser beam system. There is no possibility
of laser emission if the unit is not opened. RE-
FER TO QUALIFIED SERVICE PERSONNEL FOR
MAINTENANCE.

SAFETY MEASURES

Connecting to power sources
Check, whether the electricity supply in your
home sockets corresponds to the voltage speci-
fied on the housing of the unit.
To prevent fire or shock hazard do not use this
unit in places with high humidity (near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and etc.).
Keep the unit safe from dripping and splashing.
It is prohibited to immerse the unit into water.
Do not overload sockets or extension cords as
this can result in a risk of fire or electric shock.
Place the unit in a way that you could easily pull
out the plug from the socket if there are any dis-
repairs. Place the unit on the flat stable service.
For additional protection during lighting and in
cases when you are not going to use the unit for
a long time, unplug the unit. It will prevent the unit
from failure during lighting and power surges.
To unplug the unit, take the plug. Do not pull the
cord.
In order to avoid electric shock do not open the
body of a recorder yourself. Do not repair and
do not modify the unit. Technical maintenance
should be performed only by qualified service
personnel. Install the unit in places with proper
ventilation. Do not cover the ventilation open-
ings.
The unit should be situated away from heat
sources such as radiators, heat registers, stoves,
or other devices (including amplifiers) that pro-
duce heat. Do not expose the unit to direct sun-
light, excessive dust or mechanical shocks.
Be especially careful if children or disabled per-
sons are near the operating appliance.
Do not leave them unattended.
Do not place the unit near sources of open flame
such as candles.
Provide that no foreign objects get into openings
of the unit; it can lead to fire or electric shock. If it
happens unplug the unit and apply to the service
centre.
Do not listen to music too loudly via the ear-
phones. Doctors do not recommend continuous
listening to music via the earphones for a long
time.
3
ENGLISH
22.08.2011 12:00:51 22.08.2011 12:00:51