Vitek Winx Club WX 4001 MS Manual Instruction page 4

ENGLISH
Damages Requiring Service
Unplug this unit from the socket and apply to
qualified service personnel for repair of the unit
under the following conditions:
• When the power supply cord or the plug is
damaged.
• There are foreign objects inside the unit.
• If the unit got to rain or water.
• If the unit does not operate normally.
• If the unit fell down or if it has been dam-
aged.
• When there are changes in functioning of the
unit.
Cleaning
Unplug this unit from the socket before cleaning.
Use a damp cloth for cleaning. Do not use liquid
cleaners or aerosol cleaners.
Cleaning of the discs
Do not use cracked or deformed discs, it can
damage the unit.
Take a disc by the edges. Do not touch the sur-
face. Dust, scratches or fingerprints on the sur-
face may lead to a failure of the unit.
Protect discs from direct sunlight, heat sources,
high temperature and moisture.
After usage, put the discs in the case for storage.
Wipe the surface of the discs with a soft cloth
from the center to the edges periodically.
Before operation
Unpack the unit. Press the OPEN/CLOSE button
and take out the protective insert before using
the unit.
Remove all advertising labels and stickers, which
prevent the unit from normal operation, from the
upper and front part of the unit.
DESCRIPTION
1. VOLUME control
2. AUX IN jack
3. Earphones jack
4. FUNCTION (MP3(AUX)/TAPE(OFF)/RADIO)
SWITCH
5. PAUSE /STOP-EJECT / FWD / REW /PLAY
/RECORD button
6. OPEN/CLOSE deepening
7. BAND (FM ST. /FM/AM) switch
8. USB – jack
9. FM –antenna
10. TUNING knob
11. Battery compartment lid
12. Power jack
4001Instruk_ital.indd 4 4001Instruk_ital.indd 4
13. PLAY/PAUSE/USB button
14. STOP button
15. FM ST. indicator
16. BASS indicator
17. Cassette receiver lid / Cassette receiver
18. LCD-display
19. Infrared sensor
20. button
21. PROG button
22. BASS button
23. REP/RAN button
24. button
REMOTE CONTROL
25. PROGRAM button
26. -10/FOL- button
27. +10/FOL+ button
28. PLAY/PAUSE/USB button
29. / button
30. / button
31. STOP button
32. REPEAT/RANDOM button
33. VOL- button
34. VOL+ button
Note: The remote control does not operate
in the cassette playback mode and in the ra-
dio mode.
POWER CONNECTION
Line supply
Before connecting the unit, make sure that your
home electricity supply corresponds to the volt-
age specified on the unit.
1. To connect the unit, insert one end of the
power cord in the jack (12) and the other one
– into the socket. Set the FUNCTION switch
(4) to the AUX (MP3), TAPE(OFF) or RADIO
position.
2. To switch off the unit set the FUNCTION (4)
switch to the TAPE(OFF) position.
Note:
Static electricity can lead to interferences
in the operation of the unit. In this case dis-
connect the unit, and then connect it again.
If the problem does not disappear, apply to
the service center.
Battery supply
1. Disconnect the player.
2. Open the battery compartment lid (11) in the
bottom of the tape recorder, by pressing the
clamp following the arrow.
4
22.08.2011 12:00:51 22.08.2011 12:00:51