Advertisement
SERVICE MODE
tt turns the mode from the norma) mode to the "SERViCE MODE" that pushing " VOLME ^ " key and " SETT)NG " key
on the projector at a same time is continued during 3 seconds.
Normaf Mode
))C data adjustment mode
) ) C data adjustment
When replacement the oioctricai parts, readjust iiC data, if necessary.
Data for each item are adjusted by 'VOLUME +/ - " key and "LEVEL -<-/-" key on the remote control unit.
"VOLUME +" key and "VOLUME - " key change the adjustment item, and "LEVEL +" key and "LEVEL - " key change
the adjustment vaiue. The picture is changed after 2 or 3 seconds if the va!ue is changed.
The picture for !)C data adjustment.
the adjustment va!ue
the adjustment item
—31—
Advertisement
