Toshiba MMU-AP0074YH-E(-TR) Service Manual page 62

4
Push the TIME
DATA.
Change the value in SET DATA to that of a new address.
5
Push the button to confirm the new address on SET DATA.
6
Push the
Each time you push the button, the indoor unit numbers in a refrigerant line are indicated one
after another. Only the fan and louvers of the selected indoor unit are activated.
4
Repeat steps to
7
Push the button.
(All the segments on the LCD display light up.)
8
Push the button to finish the procedure.
Finish
/ buttons repeatedly to change the value of the indoor unit address in SET
button (left side of the button) repeatedly to select another address to change.
6
to change the indoor unit addresses so as to make each of them unique.
Press to finish
setting.
– 62 –