Toshiba MMU-AP0074YH-E(-TR) Service Manual page 57

Confirming the indoor unit addresses and the position of an indoor unit using the remote
controller
Confirming the numbers and positions of indoor units
To see the indoor unit address of an indoor unit which you know the position of
When the unit is individual (the indoor unit is paired with a wired remote controller one-to-one), or
it is a group-controlled one.
UNIT No.
TEMP.
TIMER SET FAN
TIME SAVE
FILTER
RESET TEST SET CL SWING/FIX
(Execute it while the units are running.)
1
Push the
2
Push the
A unit numbers
shows the system address and indoor unit address of the unit.
When 2 or more indoor units are connected to the remote controller (group-controlled units), a number of other
connected units appears each time you push the
CODE No.
1
ON / OFF
Starts
MODE
running
VENT
UNIT LOUVER
2
button if the units stop.
button (left side of the button).
is indicated on the LCD (it will disappear after a few seconds). The indicated number
button (left side of the button).
– 57 –