Download Print this page

Toshiba e-STUDIO450 Product Overview page 8

Hide thumbs Also See for e-STUDIO450:

Advertisement

Toshiba e-STUDIO450
Print
The Toshiba e-STUDIO450 network print
upgrade is powered by the integrated e-Bridge
266MHz 64-bit RISC controller, with 128MB
main RAM, 32MB page memory and a 40GB
hard drive. The device comes 10/100 BaseT
ready with parallel and USB 1.1 ports for local
connections. USB 2.0 connections can be
made, but will run at the slower USB1.1 data
rate.
The Toshiba e-STUDIO450 includes PCL6
and PostScript 3 as standard. This is good
because PostScript is often an optional
purchasable item on rival devices.
The PCL6 Driver:
PCL6 is likely to be the most commonly
installed driver, it is well laid out, guiding the
user through the document production
process. It is split into five main tabs.
Setup:
We were pleased to see that all the major
document settings are found on a single tab.
Settings include document size, paper
selection, number of copies, collation, finishing
and duplex. Many users will never need to go
beyond this first tab.
Print Job:
Print jobs can be set to print at a designated
time (Scheduled Print), allowing large jobs to
be printed out of busy office hours. For users
printing sensitive/security critical documents,
jobs can be sent with a password which must
be entered at the printer before the job is
released (Private Print). For users wishing to
make a long print run of a complex document,
the driver lets you print the first set, with the
remainder of the print run being held in
memory. This allows the user to check that the
first set is correct before releasing the
remaining sets (Proof Print). Documents can
also be stored on the hard drive of the device
for later use (Store to e-FILING).
www.BERTL.com
tel. 732-761-2311
fax. 732-761-2312
info@BERTL.com
Copyright © 2004 BERTL, Inc. 24-Feb-04
All Rights Reserved. The license under which this document is made available and applicable law prohibit
any reproduction or further transmission of any portion of this document. This document may only be viewed
electronically through the BERTL.com website and may not be stored in electronic or hard copy format. Any
reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or
omissions contained in this document.
LabCheck
®
Screenshots from PCL6
printer driver
Page Number 7

Advertisement

loading