AOpen AX4B-533 Plus Easy Installation Manual page 5

10. JP15 and JP16 Dr. Voice Select Jumpers
Dr. VoiceII is a great feature of AX4B-533 Plus, which can identify the problems you may
encounter in the operating system. It can clearly "tell you" whether the problem is caused
from components or improper installation such as CPU, memory module, VGA, PCI
add-on card, FDD, HDD or keyboard. Dr. Voice provides four language versions: English,
German, Japanese and Chinese. You can select your preferred language by JP15 &
JP16 jumpers. However, if you want to disable this function, you may also adjust both JP1
and JP2 and set them to pin 2-3 to disable the buzzer and speaker from making out
voices.
JP15 Pin 1
Dr. Voice Language
Select Jumpers
JP15 JP16
1
1
English
Japanese
Chinese
(Default)
11. JP2 Speaker Jumper
This motherboard comes with another considerate option that allows you to turn off the
voice from speaker. You can choose not to be bothered by the warning made from Dr. Voice
when it detects any error in operating system. To disable this function, set JP2 to pin 2-3 to
stop speaker from sending out voices.
1
1
Disable
Enable
(Default)
JP2 (Speaker)
JP16 Pin 1
German
12. Power-on and Load BIOS Setup
After you finish jumper settings and connect correct cables, power on and enter the
Del
BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load Setup
Defaults" for recommended optimal performance.
13. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select model
name. After selecting the model name, you can install its IAA, INF, Audio, LAN, Serial ATA
and USB2.0 drivers from this CD.
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.