Table of Contents
Advertisement
iPod/iPhone Mode Operation
Connect
Connect an iPod/iPhone to the USB socket on
front panel. When connecting a device, press
the [SOURCE] button to select USB/iPod mode
to start playing. The track information displays
on the screen once
playback
start.
4X45W
SOURCE
AS/PS
IR
Compatible iPod/iPhone
You can connect the following iPod/iPhone:
iPod nano (6G)
iPhone 4
iPod nano (7G)
iPhone 4S
iPhone 5
iPod touch (4G)
iPod touch (5G)
iPhone 5C
iPhone 5S
iPhone 3GS
Minimum iOS 5.0 or higher
Note:
Please make sure the iPod/iPhone cable is
connected correctly. And please only use
original iPod/iPhone cable.
Selecting a Track
1. Press the [
] button to advance to the
next track/song.
Press the [
] button to go to previous
track/song.
2. Press and hold the [
] button to fast
forward through the track/song.
Press and hold the [
] button to fast
backward through the track/song.
Play / Pause
Press the [
] button to pause the track/song
that is currently playing.
Press the [
] button to resume playing the
track/song that has been paused.
iPod Menu Search
1. Press the [BAND/SEARCH] button to select
the iPod menu mode.
2. Rotate the [ VOLUME ] knob to switch between
categories.
PLAYLISTS, ARTIST, ALBUM, GENRE,
SONGS, COMPOSER, AUDIOBOOK
3. Press [ /MUTE ] button to confirm selection.
4. When display the desired Playlist
or
Artist
or
Album or Songs or Genre or Composer or
Audiobook, then press the [
/MUTE] button
to confirm.
5. Rotate the [VOLUME] knob to choose the
desired song to hear.
6. Press the [
/MUTE] button to confirm
selection and then you will hear the chosen song.
Display Function
During playback, pressing the [ INFO ] button
will automatically cycle through the following
information on the file being played on the LCD:
ALBUM -> SONGS -> ARTIST -> CLOCK
6. TROUBLESHOOTING
GENERAL
Problem
Cause
Unit fuse blown.
Unit cannot
power on.
Car battery fuse blown.
Improper audio output connection.
No/low audio
output.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is in contact
with metal part of car.
Speaker power rating does
Poor sound
not match unit.
quality or
distortion.
Wrong connections.
Speaker is shorted.
Incorrect connection between
Unit resets itself
ACC and Battery.
when engine is off.
USB
Problem
Cause
USB device cannot
The USB device has been
inserted with wrong direction.
be inserted.
The USB connector is broken.
The USB device is damaged.
USB device is not
recognized.
Connectors are loose.
No sound heard with
No MP3/WMA file is stored in
the display "No File"
the USB device.
shown.
Sound skips or is
MP3/WMA files are not
noisy.
encoded properly.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Check wiring and correct.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check the wiring and correct.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
FZ105
7
Advertisement
Table of Contents
