Operating The Appliance; Switching On - Miele KFN 37452 iDE Operating And Installation Instructions

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").

Switching on

When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol  goes
out and the appliance starts to cool
down.
The sensors for the refrigerator and
freezer sections will appear in the
control panel:
The refrigerator section sensor is
highlighted in yellow and the current
temperature in the refrigerator appears
in the display.
Switching on and off
When the refrigerator door is open, the
interior lighting will come on and the
adjustable shelf LED lighting will
become brighter until it has reached its
maximum brightness.
When the appliance is switched on for
the first time, the sensors for the freezer
section and the alarm symbol  will
flash until the set temperature is
reached.
When the set freezer temperature is
reached, the sensor for the freezer
section lights up constantly and the
alarm symbol  goes out.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it. Do
not place food in the freezer section
until the temperature is at least
-18 °C.
21