Aiphone IS SERIES Operation Manual page 17

E
Setting the call transferring [TRANSFER]
You can make the following settings for transferring calls.
Sub item Description
[CALL Enables (ON) or disables (OFF)
TRANSFER]
the call transferring.
[TRANSFER (Available when [CALL
DESTINA]
TRANSFER] is set ON.)
(Transfer
Selects a master station as the
destination)
transfer target.
[TRANSFER (Available when [CALL
DELAY] TRANSFER] is set ON and the
target master station is set at
[TRANSFER DESTINA].)
Sets the time of starting
transferring after a call is
received.
[SCHEDULE Enables or disables the call
TRANSFER]
transferring to be performed
on the schedule preset by the
system settings automatically.
[SCHEDULE (Available when [SCHEDULE
DESTINA]
TRANSFER] is set ON.)
(Schedule
Selects a master station as the
destination)
transfer target on the schedule.
[TELEPHONE (Available in the standard (IP)
TRANSFER] system.)
[SCHEDULE TEL
TRANSFE]
1
Press repeatedly to select [TRANSFER] (so
that it is highlighted), and then press ZOOM/WIDE
to select.
The sub items are displayed.
The sub items can also be displayed by pressing
*
TRANSFER in the standby mode.
NOTE:
The above display example differs from the actual one.
2 Press
item (so that it is highlighted), and then press
Setting range
ZOOM/WIDE to select.
ON
OFF
(Registering a
3 Make the settings on each sub item as follows.
master station)
00-60 (sec.)
[CALL TRANSFER]:
Press
press ZOOM/WIDE to decide on the selected one.
ON
OFF
[TRANSFER DESTINA] (Transfer destination):
(Registering a
This setting is available only when [CALL TRANSFER] is ON.
*
master station)
Press
(so that it is highlighted), and then press ZOOM/WIDE .
ON
OFF
The LED on
*
ON
TRANSFER] is set ON and the target master station is set at
OFF
[TRANSFER DESTINA].
[TRANSFER DELAY]:
This setting is available only when [CALL TRANSFER] is
*
set ON and the target master station is set at [TRANSFER
DESTINA].
Press
press ZOOM/WIDE to select.
If the delay time is set to "00", a call will be transferred to the
*
target station directly.
[SCHEDULE TRANSFER]:
Press
press ZOOM/WIDE to decide on the selected one.
[SCHEDULE DESTINA] (Schedule destination):
This setting is available only when [SCHEDULE TRANSFER]
*
is ON.
Press
is highlighted), and then press ZOOM/WIDE .
Press
*
previous screen.
repeatedly to select the target sub
repeatedly to select ON or OFF, and then
repeatedly to select the target master station
TRANSFER
lights up (red) when [CALL
repeatedly to set the delay time, and then
repeatedly to select ON or OFF, and then
to select the target master station (so that it
SETTING
as "BACK" function to return to the
17