Operational Guidelines - PowerTech MI-5085 User Manual

GEI\IERAL SAT'ETY, INSTALATION, &OPERATING GI]IDELINES
Operational Guidelines
Step 1 Remove inverter from its packaging. Check to verify that the
ON/OFF Switch is inthe OFF position
Step 2 Connect the cables to the Power lnput Terminals located at the rear
part of the inverter. Do not tighten these screws excessively.
Step 3 Connect the cable securely from the Negative Terminal (-) of the
inverter to the Negative Terminal (-) of the l2V power source.
Step 4 Connect the cable securely from the Positive Terminal (+) of the
inverter to the Positive Termina(+) of the 12V power source.
Step 5 Sel power switch to ON position. Check the status of the LED
indicators. LED indicators should be lighted.
step 6 setpower switchto oFF position.
Step 7 Plus the equipment / appliance into the AC receptacle at the front
panel of the inverter. Leave the equipmeni / appliance switched
OFF.
Step 8 Set the power switches of both inverter and equipment / appliance,
respectively to ON position ( The inverter is now ready to hansfer
power to the equipment / appliance.)
- P 4 -