Vertex Standard VX-920E SERIES Operating Manual page 21

C 1 C 5
ALL TO ALL
Press the assigned programmable key to send a 2-
tone/5-tone sequential tone group which is pre-de-
fined.
C U /D
ODE P OWN
Press the assigned programmable key to select a 2-
tone/5-tone encode code from the pre-defined encode
list.
C S
ODE ET
Press the assigned programmable key to change the
encode digits for 5-tone operation. To change a spe-
cific digit, select the desired digit using the [ A ] key,
then change the number using the [ B ] / [ C ] keys, and
store the number using the [ D ] key.
S D
IAL ( 16-
PEED
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the assigned programmable
key, then press the front panel's numeric key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer or Network Administrator. The
DTMF tones sent during the dialing sequence will
be heard in the speaker.
VX-920E S O
ERIES PERATING
A O
DVANCED
)
M
ANUAL
PERATION
O SW1
PTION
Press the assigned programmable key to toggle the
optional accessory "1" "On" and "Off."
O SW2
PTION
Press the assigned programmable key to toggle the
optional accessory "2" "On" and "Off."
E
MERGENCY
The VX-920E series include an "Emergency" fea-
ture which may be useful for alerting another party
monitoring on the same frequency as your
transceiver's channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your
Dealer.
H C
OME HANNEL
Press the assigned programmable key to recall the
pre-defined Home group/channel. When you recall
the Home group/channel, the "
pear on the LCD.
H
" notation will ap-
19