Description Of Operating Functions - Vertex Standard VX-920E SERIES Operating Manual

Description of Operating Functions

M
ONITOR
Press the assigned programmable key to cancel
CTCSS- and DCS-controlled squelch; the BUSY/TX
indicator will glow green. Press and hold this button
for 1.5 seconds to hear background noise (unmute
the audio); the BUSY/TX indicator will blink green.
L
AMP
Press the assigned programmable key to illuminate
the LCD for five seconds.
14
A O
DVANCED PERATION
S
CAN
The Scanning feature is used to monitor multiple sig-
nals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:
Press the assigned programmable key, or set the
toggle switch to the assigned position to activate
scanning.
The scanner will search the channels of each chan-
nel, looking for active ones; it will pause each time
it finds a channel on which someone is speaking.
Press the assigned programmable key again, or
set the toggle switch to a different position to dis-
able scanning. Operation will revert to the pro-
grammed revert channel.
Note: Your dealer may have programmed your ra-
dio to stay on one of the following channels if you
press the PTT switch during scanning pause:
Current channel ("Talk Back")
"Last Busy" channel
"Priority" channel
"Home" channel
"Scan Start" channel
VX-920E S O
ERIES
M
PERATING ANUAL