Using The Control Surface Functions - Zoom R16 Manual

Using the control surface functions

When using the R16 connected by USB as an audio interface, the R16 keys and faders can
be used to control Cubase LE's transport and mixer.
About the control surface
In control surface mode the keys and knobs on
the R16 can be assigned to particular Cubase
LE functions.
Transport section
About banks
Fader section
HINT
Assigning Keys
For a list of functions that can be assigned to
the knobs and keys of the R16, as well as other
transport/function keys that are supported by
Cubase LE, please consult the "Control Surface
Mode Functions Quick Reference Guide" of this
manual.
Reference: Control Surface Functions Quick Reference Guide
7
Control surface settings
See R16 setup and connection
steps 1~6 on P.5~6.
7
Launch Cubase LE.
8
Select "Device Setup" from the
Cubase LE "Device" menu.
p.8
9
On the top left of the device
setup window there are [+] [-]
p.9
[|<] buttons. Click the [+] and
then choose "Mackie Control."
p.9
1 0
Set MIDI input and output.
MIDI Input: Zoom R16_R24
MIDI Output: Zoom R16_R24
HINT
The display of MENU etc. may be different
depending on the version of Cubase LE.
Please refer to your Cubase LE manual.
p.12