Using Control Surface Functions; About The Control Surface; Control Surface Setup - Zoom R24 User Manual

Using control surface functions

When using the R24 connected by USB as an audio interface, the R24 keys and faders
can be used to control Cubase LE 5's transport and mixer.

About the control surface

In control surface mode the keys and knobs on
the R24 can be assigned to particular Cubase
LE 5 functions.
Transport section
About banks
Fader section
HINT
Assigning keys
For a list of functions that can be assigned to the
knobs and keys of the R24, as well as other trans-
port/function keys that are supported by Cubase
LE 5, please consult the "Control surface functions
quick reference guide" in this manual.
Reference: Control surface functions quick
☞
reference guide
9

Control surface setup

See R24 setup and connection steps 1–5 on P7~8
6
Then, launch Cubase LE 5.
7
From the Cubase LE 5 "Devices"
menu, select "Device setup..."
P .10
P .11
P .11
Open the "Device Setup..." window
8
At the top left of the Device setup
window [+], [−] and [|<] buttons
appear. Click the [+] and select
"Mackie Control"
9
Set the MIDI input and output
MIDI input:
MIDI output:
P.14
ZOOM R16_R24
ZOOM R16_R24