Installation Requirements; Builders Opening - Faber Relaxed L Installation Manual

Table of Contents

Advertisement

3 Installation requirements

Note: Since the appliance is a source of heat, circulation of air occurs. Therefore it is of
importance that you do not use the appliance shortly after a renovation of the home.
Because of the natural circulation of air, moist and volatile components from paint,
building materials, carpet etc. will be attracted. These components can settle onto cold
surfaces in the form of soot.
As on all heat producing appliances, soft furnishings such as blown vinyl wallpaper placed
too near to the appliance may become scorched or discoloured. This should be born in
mind when installing the appliance.
3.1

Builders opening

The Relaxed L can be build in a non-combustible fire place or builders opening. This could
be either an existing builders opening or a new made prefab builders opening.
When you apply your own false chimney breast design to the Relaxed L you have to meet
these general requirements:
The false chimney breast has to be made of inflammable material
Always install the appliance before building up the false chimney breast
Check figure 2-3 for the dimensions
Always ventilate the space above the appliance using vents to assure a good air-
circulation
The plaster of the outside has to be resistant to a high temperature. Therefore use the
plaster materials especially made for this, to prevent discolouring (min. 100 °C
temperature resistant)
Make sure the plaster dries well before using the appliance. Let the thickness in mm be
the number of days the plaster has to dry
3.1.1 False chimney breast Relaxed L frameless
Use the steel building guide (fig. 2-1) mounted on the front of the appliance
Make a framework of metal studs around the steel building guide; keep in mind the
thickness of the Promatec you use!
Place metal studs at every corner of the false chimney brest; keep in mind the
thickness of the Promatec you use!
Build with Promatec around the steel building guide (fig.2-2)
Build the rest of the false chimney brest
Use 12 mm Promatec for the front of the false chimney breast.
UK
IRL
>
>
>
> 8

Advertisement

Table of Contents
loading

Table of Contents