Dacor DHW301 Installation Instructions
Hide thumbs
Also See for DHW301:
- Installation instructions manual (16 pages) ,
- Use and care manual (12 pages) ,
- Planning manual (1 page)
Advertisement
Quick Links
DHW301, DHW361, DHW421 and DHW482
DANGER:
Parts Included
Top cap (Qty 1)
Tools and Materials Required
The following items are not provided with the kit and are required for proper installation:
•
Sheet metal screws (suitable for attaching
duct work)
•
Duct tape
•
Drill with 1/16" drill bit
Introduction
This kit contains the materials necessary to convert a DHW series
hood to a recirculating configuration in instances where exhausting
the hood outside the building is not practical or desired. The kit
consists of a top cap and charcoal filter(s). When installed, the top
cap redirects air flow out the vents in the sides of the hood chimney
assembly. The provided charcoal filter(s) are installed underneath
the baffle type filters included with the hood. The charcoal filter(s)
reduce smoke and fumes before the hood exhaust is vented into the
room.
RANGE HOOD MODELS:
Recirculating Kits:
AVDH1, AVDH2
Electric shock and explosion hazard! Before installation,
turn off power at the circuit breaker or fuse box.
Charcoal Filter(s)
•
Tin snips
•
Piece of 8-inch diameter, round metal duct, 24 3/4
inches long (use only solid metal duct)
•
Level
Top cap
INSTALLATION
INSTRUCTIONS
AVDH1 (Qty 1)
AVDH2 (Qty 2)
Chimney
Duct inside
chimney between
hood and top cap
Part No. 107910 Rev. B
Advertisement
Related Manuals for Dacor DHW301
Summary of Contents for Dacor DHW301
-
Page 1: Parts Included
RANGE HOOD MODELS: DHW301, DHW361, DHW421 and DHW482 INSTALLATION Recirculating Kits: AVDH1, AVDH2 INSTRUCTIONS DANGER: Electric shock and explosion hazard! Before installation, turn off power at the circuit breaker or fuse box. Parts Included Charcoal Filter(s) Top cap (Qty 1) - Page 2 Install the duct collar or exhaust cowling on the top of the hood assembly as shown, using the screws included with the hood. Duct Collar Installation - Exhaust Cowling Installation - Models DHW301, DHW361 and DHW421 Model DHW482 STEP 3 Install the hood on the wall according to the installation instructions included with the hood.
- Page 3 DHW Series Hood Recirculation Kit STEP 9 Using sheet metal screws and duct tape, attach the end of the duct length cut in Top cap step 8 to the collar/cowling on the top of the hood. Use a level to make sure the duct is vertical.
- Page 4 See diagram below. STEP 15 Reinstall the baffle filter(s). Removal tab Charcoal filter Reinstall baffle type filter with charcoal filter underneath Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com...