Table Of Contents - Viking VCSO244 Installation Manual

Table of Contents

Warnings & Important Information ___________________________________________ 2
Dimensions & Specifications (Professional Series)__________________________ 3
Dimensions & Specifications (Designer Series)_____________________________ 4
Cutout Dimensions (Professional & Designer Series) _______________________ 5
General Information ___________________________________________________ 6
Recommendations for Moving _______________________________________ 6
Installation ___________________________________________________________ 7
Site Preparation ____________________________________________________ 7
Installation Procedure _____________________________________________ 7-9
Trim Kit Specifications _________________________________________________ 9
Performance Checklist ________________________________________________ 10
Final Preparation _____________________________________________________ 11
Service & Parts____________________________________________________ 11
Wiring Diagram ______________________________________________________ 12
Electrical Requirements ____________________________________________ 12
Maximum Amp Usage _____________________________________________ 12
IMPORTANT-
Please Read and Follow!
• Before beginning, read these instructions
thoroughly and carefully.
• This unit includes metal parts, therefore,
caution should be used in the handling
and installation of this product to avoid
the possibility of injury.
• Do not remove permanently affixed labels,
warnings or plates from the product as this
may void the warranty.
• Observe all local and national codes,
requirements and ordinances.
• Installation must conform with local codes
or in the absence of codes, the National
Electrical Code, ANSI/NFPA 70 - latest
edition.
• IN MASSACHUSETTS: This appliance must
be installed by a Massachusetts licensed
plumber or electrician.
• IN CANADA: Installation must be in
accordance with the current CSA C22.1
Canadian Electrical Codes Part 1 and/or
local codes.
• Installers should leave this guide with the
consumer who should retain it for the local
inspector's use and for future reference.
• Consumer should retain this guide for the
local Electrical inspector's use.
W R N I N G
This appliance is heavy - use extreme care
when handling!
2
W R N I N G
DO NOT use the handle or appliance door
to lift the appliance. Remove door before
installation to ensure that it is not used to
lift the unit.
W R N I N G
The appliance should not be used for
space heating. This information is based on
safety considerations.
W R N I N G
The misuse of the appliance door(s) (e.g.
stepping, sitting, or leaning on them) can
result in hazards or injuries and damage to
the product.
W R N I N G
ELECTRIC L GROUNDING INSTRUCTIONS
This appliance must be electrically in
accordance with local codes, or grounded
in the absence of local codes, the National
Electrical ANSI/NFPA 70, latest edition.
W R N I N G
The use of cabinets for storage above the
appliance may result in potential fire or
burn hazard.
W R N I N G
To reduce the risk of tipping the appliance,
the appliance must be secured by properly
installing anti-tip devices packed with the
appliance.
W R N I N G
Frame grounded by a 3-conductor cable
assembly. DO NOT use an extension cord
with this appliance. Such use may result in
fire, electrical shock, or other personal
injury.