Introduction - iNels eLAN-RF-003 Installation Manual

1. Introduction

Congratulations on purchasing the Smart RF box eLAN-RF-003 control unit, an element of the RF
Control wireless system.
• The smart RF box enables you to control your electrical installation by smartphone, tablet or SMART
TV.
• It transmits and receives commands of up to 40 units, and it processes set programs for automatic
control, (you can gradually expand installation from 1 unit iNELS RF Control).
• Thanks to bi-directional communication, it visualizes the current status of individual units.
• The smart RF box eLAN-RF-003 is connected by network cable LAN to the home network (router)
and communicates with your smart phone.
• The intuitive application environment offers central control from one place.
• Function of application iHC-MARF / iHC-MIRF:
- control of hot water or electric underfloor heating
- measuring temperature by wireless sensors
- switching appliances (garage door, blinds, fan, sprinklers, sockets, etc.)
- dimming lights (LED, energy-saving, halogen or classic lamps)
- time switching (delayed switching off of light when leaving room)
- video camera integration
- scenes (make multiple commands at once with a single press).
• If you don't have a fixed IP address, the Smart RF box will obtain it from DHCP server automatically.
• Power is supplied to the Smart RF box via adapter 10-27V DC (included in the supply) or PoE by
power source (router) 24V DC.
• By connecting two Smart RF boxes by LAN cable, you avoid the problem of lack of signal range.
• Option of setting via web interface or directly in the application iHC-MARF (Android) / iHC-MIRF
(iPhone).
• The package includes an internal antenna AN-I, in case the Smart RF box is located in a metal
switchboard, you can use the external antenna AN-E for better signal reception.*
• Range up to 100 m (in open space), if the signal is insufficient between the Smart RF box and unit,
use the signal repeater RFRP-20.
• Communication frequency with bidirectional protocol iNELS RF Control.
* Max Tightening Torque for antenna connector is 0.56 Nm.
Attention:
The minimum distance between the controller (system unit) and the actuator must not be less than
one centimeter.
Setting options:
• max. number of actuator - 40
• max. number of temperature zones - 16
• max. number of time schedules - 16
• max. number of central sources - 10
• max. number of heating and cooling devices in a heating zone - 10
• max. number of intervals in a time schedule – 8
Manual / rev.7
eLAN-RF-003
4 of 16
Page