Button Reboot – to restart the device eLAN-RF-003.
Button Devices is used for adding RF actuators to the eLAN-RF-003.
Button (+) - add a new RF element:
1. Product Type – select RF element
2. Address – enter the address of the RF element that is listed right on the box of the added
RF element (six-character code).
3. Label - any naming of the element, e.g. "Kitchen light".
4. Type - select the type of icon (e.g. light), which will be displayed on the floorplan.
Create you will store the RF actuator in the eLAN-RF-003.
Button
- remove all elements.
Manual / rev.7
eLAN-RF-003
12 of 16
Page