Adjusting The Projector Level - Optoma EP771 User Manual

Adjusting the Projector Level

Take note of the following when setting up the projector:
•
The projector table or stand should be level and sturdy.
•
Position the projector so that it is perpendicular to the screen.
•
Be sure cables are not in the way or can cause the projector to be knocked over.
B
1.
To raise the level of the projector, lift the projector [A] and press the height-
adjuster button [B].
The height adjuster drops down [C].
2.
To lower the level of the projector, press the height-adjuster button and push
down on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt adjuster [D] right or left until
desired angle has been achieved.
A
C
Setup and Operation
23
D