Resetting The Lamp - Optoma EP771 User Manual

Resetting the Lamp

After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open
the Image menu.
2.
Press the cursor
move to the Management menu.
3.
Press the cursor
move down to Status.
4.
Press the cursor
button to enter Status menu
5.
Press the cursor
move down to Lamp Hour Reset.
Press the cursor
button.
A message screen appears.
6.
Press the cursor buttons in this
order: ;
The Status menu appears again
showing the Lamp Hours reset to
zero.
button to
button to
or Enter
button to
or Enter
; ; .
42
Appendices