Download Print this page

Dual XDMA6855 Installation & Owner's Manual page 20

Am/fm/cd/mp3/wma/ipod/bluetooth ready receiver with motorized detach face
Hide thumbs Also See for XDMA6855:

Advertisement

®
Function
20
Press
once. An "_" will appear on the display.
Input the desired phone number using the 0-9, *, # buttons on the
head unit front panel. Press
A phone call may also be placed from your mobile device using the
keypad, phone book or speed dial.
To enter last number dialing mode, press
second time. The head unit will display "Last Number Dialing."
Press
to cycle through the received, dialed or missed call
categories. Rotate the
calls in the selected category.
choice before the head unit returns to Bluetooth standby mode.
Press
to begin dialing the selected number.
If an incoming call is detected, the head unit will automatically
switch to Bluetooth mode, muting any current audio.
The incoming phone number will scroll across the display, the
phone icon will flash on the display, and a ring tone will be audible
from the vehicle speakers. See Bluetooth Settings for speaker
configurations.
: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile
device is off, you may not hear an incoming ring tone.
Press
on the head unit or BTM60 to receive a call. The phone
icon will illuminate solid.
To refuse an incoming phone call, press and hold
seconds.
The head unit will display the elapsed time of the phone call.
The
will adjust the volume of the call.
Press
to select between microphone on (MIC ON) and
microphone off (MIC OFF).
To transfer the phone call between the head unit and the mobile
device, press and hold
transfer audio to your mobile device before turning the head unit
off.
When a second call is incoming, press
waiting. The current call will be placed on hold, and the second call
will be active. Press
Hold
for 3 or more seconds to end a call.
If the phone call was received, the head unit will return to previous
mode when call is ended.
Description
to begin dialing.
, then press
to cycle through the last 5
: You have 5 seconds to make a
for 3 seconds during a call.
to activate call
again to return to the first call.
a
for 3
:

Advertisement

loading