Yamaha MT-03 Service Manual page 198

Removing the leads, cables, hoses, and ignition coil
Order
Coolant
Radiator
Rear wheel
Rear shock absorber assembly
Swingarm/cross bar (R.H.)
Starter motor
Air filter case
Throttle body/fast idle plunger inlet hose
Thermostat/thermo sensor
Water pump assembly/water pump outlet hose
Air cut-off valve assembly/air-filter-to-air-cut-
off-valve hose
1 Shift pedal
2 Crankcase-to-breather-chamber hose
3 A.C. magneto coupler
Job/Parts to remove Q'ty
Drain.
Refer to "CHANGING THE COOLANT"
on page 3-16.
Refer to "RADIATOR" on page 6-1.
Refer to "REAR WHEEL" on page 4-12.
Refer to "REAR SHOCK ABSORBER
ASSEMBLY" on page 4-60.
Refer to "SWINGARM" on page 4-63.
Refer to "ELECTRIC STARTER" on page
5-57.
Refer to "AIR FILTER CASE" on page 4-4.
Refer to "THROTTLE BODY ASSEMBLY"
on page 7-4.
Refer to "THERMOSTAT" on page 6-4.
Refer to "WATER PUMP" on page 6-7.
Refer to "AIR INDUCTION SYSTEM"
on page 7-11.
1
1
2 Disconnect.
5-3
ENGINE REMOVAL
Remarks