Checking And Lubricating The Cables; Lubricating The Levers And Brake Pedal; Lubricating The Sidestand; Lubricating The Side Suspension - Yamaha MT-03 Service Manual

EWA13260
WARNING
Never attempt to make any repairs to the
wheel.
NOTE:
After a tire or wheel has been changed or re-
placed, always balance the wheel.
EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the in-
ner and outer cables.
WARNING
Damaged outer cable may cause the cable
to corrode and interfere with its movement.
Replace damaged outer cable and inner
cables as soon as possible.
1. Check:
• Outer cable
Damage Replace.
2. Check:
• Cable operation
Rough movement
Recommended lubricant
Engine oil or a suitable cable
lubricant
NOTE:
Hold the cable end upright and pour a few
drops of lubricant into the cable sheath or use
a suitable lubricating device.
EAS00171
LUBRICATING THE LEVERS AND
BRAKE PEDAL
Lubricate the pivoting point and metal-to-metal
moving parts of the levers and brake pedal.
Recommended lubricant
Lithium-soap-based grease
Lubricate.
EAS00172

LUBRICATING THE SIDESTAND

Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
Lithium-soap-based grease

LUBRICATING THE SIDE SUSPENSION

The pivoting points of the side suspension
must be lubricated at the intervals specified in
the periodic maintenance and lubrication chart.
Recommended lubricant
Swingarm pivots
Bearing grease
Other pivoting points
Lithium-soap-based grease
3-28
CHASSIS