Lamp Setting
Press Menu to open the OSD menu. Press
up and down in the OPTIONS menu. Select Lamp Setting in the OPTIONS menu. Press
change values for settings, and then press Enter to confirm the new setting.
I
TEM
Lamp Hour
Lamp Reminder
Lamp Mode
Lamp Reset
Set the number of hours for the lamp to be active. Standard and
bright counter are separated.
Show or hide the warning message
Note: The lamp reminder warning is only displayed when less
than 30 hours remain.
Select the lamp mode for higher or lower brightness to save lamp
life.
Press Enter to reset the lamp life hour after replacing the lamp. See Resetting the
Lamp on page 44.
to move to the OPTIONS menu. Press
D
ESCRIPTION
40
Menu Setting
to move
DEFAULT
–
On
Bright
to