ReSound MICRO MIC User Manual page 13

Pairing the Micro Mic in channel 1
1. Make sure the Micro Mic is turned ON. Your hearing instru-
ments must be OFF – open the battery doors.
2. With the tip of a pen
or similar object, press
the small pairing but-
ton once, as shown in
the picture to the right.
The status LED will now
blink orange once every
2 seconds to indicate that
the Micro Mic is ready to
be paired in channel 1.
Your Micro Mic will remain in Pairing mode for 20 seconds.
3. While in Pairing mode, close the battery doors on both
hearing instruments. A successful pairing will be indi-
cated by an audible melody being played in both hear-
ing instruments and the status LED (see page 8) will stay
solid orange for 3 seconds. You are now ready to use the
Micro Mic!
13