How To Set The Unit; Control Panel - iSolution imove 700s User Manual

6. If changing the lamp, remove old lamp from lamp socket. Hold the new lamp only by its
ceramic base. Never touch the glass bulb. Insert the new lamp in the lamp socket.
7. Please turn the head in horizontal position. Hinge must be on the upper side of the head.
Turn screws left and remove plastic cover. Loosen head screw and open the lamp cover
8. With the nipple of the lamp facing the back insert one end of the lamp into the socket. Pull
up the spring of the other side of the socket and snap the other end of the lamp into place.
Make sure it fits correctly into the socket.
the lamp in correct position.
Please refer to the diagram to know how to put
8B

4. How To Set The Unit

4.1. Control Panel

MONITOR
To show the various menus
LED
DMX On
Button
ESC To go back to the previous functions
ENTER To confirm the selected functions
JOG WHEEL To select the given functions
On/Off
Turns On/Off the power
Fuse
To replace the fuse
DMX input/output
For DMX 512 operation, use 3/5-pin XLR plug cable to link the unit together
Sensitivity
To receives audio signal for sound activation.
Only for remote control
By connect to the 1/4" microphone jack to control the unit for Stand by, Function and Mode
function.
DMX input present
9B