Frigidaire FGEF306TPF Use & Care Manual page 19

Quick PreHeat
Use the quick preheat feature when using single rack
baking to quickly heat the oven to bake temperatures.
Use this feature only for standard baking. A reminder
tone will sound indicating when to place the food in the
oven.
For batter and dough-based bake goods such as cakes,
pastries and breads, use the standard bake or convection
bake functions for best results.
When the oven is finished preheating quick preheat will
become just like the bake feature and continue to bake
until cleared.
To set the quick preheat with an oven temperature
of 375°F
1. Arrange the interior oven rack.
2. Press uPPer or loWer to select oven.
3. Press Quick PreHeat. "350" will appear in the
display. If a preheat of 350°F is needed, press start.
4. Press 3 7 5.
5. Press start. "Pre" will be displayed while the oven is
preheating.
SETTING BAKE
The BAKE pad controls normal baking. If a rapid
preheating is preferred, refer to the Quick PreHeat
feature for instructions. The oven can be programmed to
bake at any temperature from 170°F to 550°F (77°C to
288°C).
Baking Tips:
• Always fully preheat the oven when cooking soft baked
goods such as cookies, cakes, breads, etc.
• During preheat, the bake and broil elements are used
in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as
possible on rack position 2 or 3.
• Allow 2" to 4" (5,1 to 10,2 cm) around the utensil(s)
for proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
Single Oven Rack
setting oven controls
To set the Bake Temperature to 375°F
1. Arrange the interior oven racks, preheat the oven.
2. Press uPPer or loWer to select oven.
3. Press BAKE, "350" will appear in the display. If a
bake of 350°F is needed, press start.
4. Press 3 7 5.
5. Press start. A beep will sound once the oven
temperature reaches 375°F and the display will show
"375°".
6. Place food in the oven.

note
Pressing oFF will stop the feature at any time.
To change the Bake Temperature (example:
changing from 375°F to 425°F)
1. Press uPPer or loWer to select oven.
2. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press BAKE and "375" will appear in the
display.
3. Press 4 2 5. "BAKE" will continue to flash and
"425°" will appear in the display.
4. Press start.

note
During the first rise of temperature, the Bake and Broil
elements will also cycle for a better heat distribution.
Oven rack positions
19