Wireless Display - Toshiba Satellite C50-C User Manual

Do not plug/unplug an HDMI device under the following conditions:
When you connect a television or external monitor to the HDMI port, the
display output device is set to HDMI.
When you unplug the HDMI cable and replug it, wait at least 5 seconds
before you replug the HDMI cable again.
When you change the display output device, the playback device might not
switch automatically. In this case, in order to set the playback device to the
same device as the display output device, adjust the playback device
manually by the following steps:
1.
2.
3.
4.
5.
Settings for display video on HDMI
To view video on the HDMI display device, be sure to configure the
following settings otherwise you might find that nothing is displayed.
Be sure to use the function key to select the display device before starting
to play video. Do not change the display device while playing video.
Do not change the display device under the following conditions.
Selecting HD Format
To select the display mode, do the following:
1.
2.

Wireless display

Your computer might support Wireless display, a wireless technology which
utilizes Wi-Fi to allow the computer to be connected to external displays
User's Manual
The system is starting up.
The system is shutting down.
Click Control Panel -> Hardware and Sound -> Sound under
Windows System group in All apps.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
While data is being read or written
While communication is being carried out
Click Control Panel -> Appearance and Personalization -> Display
-> Change display settings -> Advanced settings -> List All
Modes under Windows System group in All apps.
Select one of the modes at List All Modes.
4-33