Toshiba Media Player By Smedio Truelink - Toshiba Satellite C50-C User Manual

System ON CDP Charge
This function enable/disable CDP (Charging Downstream Port) to use rapid
USB charge while the computer is powered on. When "System ON CDP
Charge Mode" is enabled, your computer can supply USB bus power
(DC5V, 1.5A) to the compatible ports while the computer is turned on.
To set System ON CDP Charge Mode, click System Settings -> USB
under TOSHIBA group in All apps.
Enabled
Disabled
The "System ON CDP Charge Mode" might not work with certain external
devices even if they are compliant with the USB specifications. In those
cases, use a USB port without "USB Sleep and Charge function" or disable
"System ON CDP Charge Mode".
It is recommended that AC adaptor is connected to the computer while
supplying USB bus power (DC5V, 1.5A).
When your computer battery capacity is too low to continue, "System ON
CDP Charge Mode" might not work. In those cases, connect the AC
adaptor and reboot the computer.
Always use the USB cable that was included with your USB device.
When "System ON CDP Charge Mode" or "USB Sleep and Charge
function" is enabled, the "USB Wakeup" function might not work. In that
case, use a USB port without "USB Sleep and Charge function" or disable
both "System ON CDP Charge Mode" and "USB Sleep and Charge
function".

TOSHIBA Media Player by sMedio TrueLink+

Be aware of the following limitations when you use the TOSHIBA Media
Player by sMedio TrueLink+:
Notes on use
TOSHIBA Media Player by sMedio TrueLink+ is a multimedia player which
can be used to play back video, music, and photo.
This software is only provided with some models.
User's Manual
It is recommended that the AC adaptor is connected while TOSHIBA
Media Player is running. Power saving features might interfere with
smooth playback. When TOSHIBA Media Player is used with a battery
power, set the Power Options to "Balance".
Rapid USB battery charge at maximum 1.5A
while PC is powered On.
Conventional USB battery charge while PC is
powered On.
5-13