Table of Contents
Advertisement
Operation
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
Main On/Off Switch to Off and
waiting five minutes before
switching the unit back on.
Maintenance
WARNING: Disconnect power
before attempting any main-
tenance or cleaning to reduce
the risk of fire, electric shock
or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for
the light bulb and heater to cool
off before touching the bulb to
avoid accidental burning of skin.
The light bulb will need to be
replaced when the flame effect is
no longer visible. There is one (1)
bulb under the ember bed which
generate the flames and embers.
Light Bulb Requirements
Quantity of 1 clear chandelier
8
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call techni-
cal support at 1-888-346-7539.
or candelabra bulb with a E-12
(small) socket base, 60 Watt rat-
ing. Example GE 60BC or Philips
60
CTC. Do not exceed 60 Watts
Replacement:
1. Unplug the unit from power
outlet.
2. On the back of the stove,
remove the three (3) screws
from the light access cover
(Figure 2).
3. Remove the light access
cover.
4. Reach into the opening and
unscrew the bulb counter
clockwise.
5. Insert new bulb.
www.dimplex.com
Advertisement
Table of Contents
