Lenovo ThinkPad Yoga 260 Hardware Maintenance Manual page 70

Removal steps of the wireless-LAN card
Step Screw (quantity)
2
M2 × 2.5 mm, flat-head, nylon-coated (1)
When installing:
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
1. Plug the gray cable into the connector labeled MAIN on the card, and plug the black cable into the
connector labeled AUX on the card.
2. When you route the cables, ensure that there is a gap between the wireless-LAN cables and the hinge,
and do not pull the wireless-LAN cables from the hinge.
64
ThinkPad Yoga 260 Hardware Maintenance Manual
1
Color
Silver
Torque
0.181 Nm
(1.85 kgf-cm)