Connection
Example 1: When two MB-X6 or MB-806A units are connected
50-ohm terminator
Notes
• Connect the supplied 50-ohm terminator to any
ANTENNA A/B OUT connector or ANTENNA A/B
CASCADE connector that is unoccupied. Do not
connect the terminator to an unoccupied ANTENNA A/
B IN/DC OUT connector.
• 9V DC power for the booster amplifier of the AN-820A
UHF antenna is supplied from the ANTENNA A and B
IN/DC OUT connectors. Take care not to short-circuit
these connectors.
• Always use a pair of antennas (A and B).
AN-820A
50-ohm terminator
MB-X6 or MB-806A
MB-X6 or MB-806A
When four antennas are connected
50-ohm
terminator
To AC power source
To AC power source
To AC power source
9
Connection