Samsung WD1142XVM User Manual page 18

setting up your washing
machine
Connecting the water supply hose
1. Remove the adaptor from the water supply hose.
2. First, using a '+' type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
3. Connect the adaptor to the water tap by tightening the
screws fi rmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a 'click' sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
YUKON-03073P-04_EN.indd Sec4:18 YUKON-03073P-04_EN.indd Sec4:18
English - 18
Adaptor
Water supply
hose
1
5 mm
2
Water tap
1
2
3
Option
4/7/2016 11:31:27 PM 4/7/2016 11:31:27 PM