Connecting The Water And Drain; Adjusting The Levelling Feet - Samsung WD1142XVM User Manual

STEP 3

Adjusting the Levelling feet

When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Level your washing machine by turning the levelling feet in
and out as necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4

Connecting the water and drain

Connecting the water supply hose
1. Take the L-shaped arm fi tting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected to
the washing machine at one end and to the
water tap at the other. Do not stretch the water
supply hose. If the hose is too short, replace
the hose with a longer, high pressure hose.
2. Connect the other end of the cold water supply
hose to your sink's cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fi tting, rotating the hose, and
retightening the fi tting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fi tting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink's hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
YUKON-03073P-04_EN.indd Sec4:17 YUKON-03073P-04_EN.indd Sec4:17
Option
English - 17
Option
4/7/2016 11:31:27 PM 4/7/2016 11:31:27 PM