Hitachi CP-X9110 Network Manual page 48

3. Web Control
3.1 Projector Web Control - Alert Settings (continued)
The Alert Items are shown below.
Item
Alarm Time
SNMP Trap
Send Mail
Mail Subject
Mail Text
Click the [Apply] button to save the settings.
The settings are initialized when clicking the [Reset] button.
48
Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
Click the [Enable] check box to enable SNMP Trap alerts.
Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Configures the subject line of the e-mail to be sent.
The length of the subject line can be up to 100 alphanumeric
characters. Using any other character may shorten the
subject line.
(Except Cold Start and Authentication Failure.)
Configures the text of the e-mail to be sent.
The length of the text is up to 1024 alphanumeric characters.
Using any other character may shorten the text.
(Except Cold Start and Authentication Failure.)
Description