Hitachi CP-X9110 Network Manual page 42

3. Web Control
3.1 Projector Web Control - Network Settings (continued)
Item
Wireless Setup
WEP Key
WPA Passphrase
SSID
(continued on next page)
42
Configures the wireless LAN settings.
Input the WEP key.
Either ASCII characters or hexadecimal numbers can be
used during WEP key input. However, you cannot use a
combination of both.The length of the key is defined as
follows according to the WEP and character formats.
Encryption
WEP 64bit
WEP 128bit
Input WPA Passphrase.
Available number of input characters is 8 to 63. Only
alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space
Select an SSID from the list.
If you require to set your unique SSID, select [Custom], then
set your own SSID following the rules below.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Description
ASCII characters
5 characters
13 characters
HEX numbers
10 characters
26 characters