Hitachi CP-X9110 Network Manual page 41

3.1 Projector Web Control - Network Settings (continued)
Item
Wireless Setup
Mode
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default
Gateway
DNS Server Address
Ch
Encryption Lock
Encryption
(continued on next page)
Configures the wireless LAN settings.
Select "Ad Hoc" or "Infrastructure".
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the DNS server address.
Select from "1" to "11", a channel to use in the Ad Hoc mode.
NOTE
• The channels may vary depending on the
country. In addition, depending on the country or region,
it may be required to use a wireless network card that
conforms to the standards in the respective country or
region.
Permits or inhibits changes of the following settings related to
wireless connection.
Mode
Encryption
Encryption key (WEP key, WPA passphrase)
SSID
When Encryption Lock is set to ON, these settings cannot be
changed by the menu of the projector.
NOTE
•
If Encryption Lock is ON, wireless connection is
performed only when it can be connected without changing
the current settings.
Select data encryption method.
Description
3. Web Control
41