Firstech 2WT11R-SS User Manual page 9

Common Icons –
Lock/Arm – Unlock/Disarm
This icon indicates whether the system is locked/armed or unlocked/disarmed. While armed, the system will
monitor the doors, trunk, hood, shock sensor, and aux inputs. If any of these inputs are triggered while the system
is armed, the alarm will be triggered.
Trunk Release
This icon will be displayed when the trunk release function has been activated. By default, the system will be
disarmed and the doors will unlock before the trunk is released.
Signal Strength
This icon is displayed if the last communication to the vehicle was successful.
Valet Mode
This icon will be displayed while you are in Valet mode. While in valet mode, the system will not perform any
functions other than lock and unlock. The alarm will not arm or disarm while locking or unlocking. If any other
function is attempted, "Sleep" will be displayed. The system will not monitor the alarm triggers while in Valet mode.
Battery Indicator
This icon displays the remaining battery life left in 33% increments.
Clock
Displays current time, remote start runtime, turbo mode time remaining, inside temperature of the vehicle, battery
voltage of the vehicle, battery voltage of the remote and failure of signal transfer.
*The above LCD layout and icons may vary slightly from the actual layout and icons displayed on your remote pager.
Starter Icons –
Engine Running
This icon will be displayed while the vehicle is running after it has been remote started.
Start Availability
This icon will be displayed when the vehicle is ready to be remote-started. If this icon is not displayed, you will not be
able to remote-start the vehicle.
Timer Mode
This icon will be displayed when Timer mode is active. Timer mode can be set up to start the vehicle every 1.5, 3, or
once very 24 hours.
Cold/Hot Start
This icon will be displayed if Cold Start mode is currently active. Cold Start mode will start the vehicle if the vehicle
reaches a preset hot or cold temperature. These temperatures can be adjusted by the installer.
Alarm Icons –
Siren
This icon will be displayed if the siren is turned on. Turning the siren off only applies to the chirps when arming,
disarming, or remote-starting. The siren will still sound if the alarm is triggered.
Hood
This icon will be displayed if the hood is opened while the system is armed. The remote will beep rapidly while
displaying this icon. This means that the alarm was triggered. If this icon appears while trying to remote-start the
vehicle, it means that the vehicle will not start because the hood is open.
9