Table of Contents
Advertisement
remote will beep once and the timer start icon will illuminate just above the clock icon. Repeat the same
step to turn off timer start mode. Timer start mode will be cancelled any time the vehicle is started
manually or remotely. To change from the default setting to optional settings, see your place of purchase.
To program a specified start time, used for Option 3, perform the following steps;
STEP 1: Enter remote programming mode by holding the Trunk and Key/Start
buttons
simultaneously for 2.5 seconds. The remote will beep once and the LCD will read "Remote Menu" to
indicate that you have successfully entered programming mode.
STEP 2: Scroll through the remote options by taping Function button
.Once the TMR icon, Engine icon
and Clock flashes tap the Lock button
to set the hour, the Unlock button
to set the minute.
STEP 3: Exit remote programming by holding down the Trunk and Key/Start buttons
simultaneously for 2.5 seconds. The remote will beep indicating that you have successfully exited
programming. The vibration icon will remain illuminated on the LCD indicating the remote is in remote
mute/vibration mode. Remember, after you set the time, you must activate timer mode before the vehicle
will start. Tap the Function button
twice followed by the Unlock button
to activate timer start mode.
The remote will beep once, LCD flash "Timer Start On" and the timer icon
will illuminate just above
the clock icon.
Cold/Hot Start Mode
Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor.
It allows you to configure your timer start feature to check the vehicle's temperature prior to starting. All
of these options require programming from your local dealer.
Anti Jacking Mode
Your system has a mode that requires you to keep your remote separate from your key chain. This
feature also requires additional labor. Please consult your installer for more details. The Anti Jacking
mode allows you to safely disable your vehicle once a thief has driven off with your property. If you are
car jacked and still have your remote, you can panic the system by holding the Lock button
down for 4
seconds. The siren will sound for 30 seconds and the vehicle will shut down.
More Optional Sensors
If you purchased an Alarm or Alarm and Remote Start system, you can add additional sensors from
Firstech. Protect your investment by adding a battery back up system to protect main power or a FT-DAS
sensor to protect custom wheels and tires.
Remote Coding / Programming Routine
IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All
remotes must be coded at the same time.
Programming 2 Way 4 Button Remotes:
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the
Acc & On positions) five times within 10 seconds. The vehicle's parking lights will flash once with the
successful completion of this step.
18
Hide quick links:
Advertisement
Table of Contents
