Whirlpool cabrio Use & Care Manual page 12

1 0, Select cycle options
• Clean Washer
m • • • Rinse & Spin
Delay Start End Beep Steam Clean Utility Tools
Steam Model
o ®
Extra Rinse Presoak
1 1, Touch and hold START/PAUSE
button to begin wash cycle
Hold to Start
Select any other cycle options you may wish to add, if not
previously set. Some cycles wilt automatically add certain
options such as Extra Rinse. These may be turned off, if
desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
Touch and hold START/PAUSE button to start the wash
cycle. When the cycle has finished, the end of cycle signal
wilt sound (if set). Promptly remove items when cycle is done
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid wilt
unlock once the washer movement has stopped. This may
take several minutes if the toad was spinning at a high speed.
Then close lid and touch and hold START/PAUSE button
again to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes the
water wilt pump out and F8E6 error code wilt appear
on the display.
12