Whirlpool cabrio Use & Care Manual page 11

7, Touch POWER to turn on washer
9, Select
cycle modifiers
Cold Hot Light Heavy None High
Q Q @ @ a o ii @ Q @ o
Temperature Soil Level Spin Speed
Make sure the dispenser drawer is closed completely, then
touch POWER to turn on the washer.
8, Select type of load to wash
WHAT TO WASH
= Mixed = Casuals • Whites ® Delicates • Bulky/Sheets
HOW TO WASH
, Normal • Quick • Cold , DeepWater • ColorLast
First touch a cycle from the "What to
Wash" and then select the "How to Wash"
to get the best combination cycle available
for the type of items you are going to wash.
See "Cycle Guide" for cycle details. Red,
green, and blue LED lights come on below
the time/status display when the "How to
Wash" ColorLast cycle is selected. Not all
cycles are available on all models.
Estimated Time Remaining wilt light up with a cycle time.
You may notice time adjusting during the cycle. This is
normal.
If you do not want to begin a cycle immediately, you may
choose DELAY START option.
To choose a delay time:
1. Touch DELAY START button to select desired delay time.
Time wilt increase in hour increments up to 12 hours.
2. Touch and hold START/PAUSE button to start delay start
time.
IMPORTANT: When delaying a cycle, use liquid HE
detergent only in the dispenser. Powdered detergents
may absorb moisture from a previous cycle and clump
before the wash cycle begins.
To cancel delay start:
1. Touch POWER to cancel Delay Start.
To pause delay start:
1. Touch START/PAUSE button to pause delay start.
2. Touch and hold START/PAUSE button again to start
Delay Start time. If the delay start time is not started
after 10 minutes the washer wilt power off.
Once you select a cycle, the default modifiers or the previous
set modifiers for that cycle wilt be tit. Touch the cycle
settings buttons to change the Soil Level, Spin Speed, and
Temperature, if desired. Not all settings are available with all
cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your items.
Temperature
Hot
Some cold water is added
to save energy. This wilt be
cooler than your hot water
heater setting
Warm
Some cold water wilt be
added, so this may be cooler
than what your previous
washer provided.
Cool
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to
help dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
11