Powering Off The Projector; Warning Indicator - Optoma TX779 Manual

Installation
English
Downloaded From projector-manual.com Optoma Manuals

Powering Off the Projector

1. Press Power to turn off the projector lamp, a message displays on the
projector's screen.
2. Press Power again to confirm, otherwise the message disappears
after 5 seconds.
3. The cooling fans continue to operate for about 10 seconds for
cooling cycle.
(If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press Power to restart the
projector.)
4. Turn off the main power switch. Disconnect the power cord from
the electrical outlet and the projector.

Warning Indicator

When the Lamp LED indicator lights red, the projector will
v
automatically shut itself down. Please contact your local reseller
or service center. See pages 54.
When the Temp LED is on a steady (not flashing) red, the
v
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it has
cooled down. If the problem persists, you should contact your
local dealer or our service center. See pages 54.
1